Difference between revisions of "Acid Value"

From WaxPedia
Jump to: navigation, search
(Referencia)
Line 30: Line 30:
  
 
|}
 
|}
 +
 +
  
 
==Referencia==
 
==Referencia==
  
 
<references />
 
<references />

Revision as of 11:33, 9 April 2013

Acidity is frequently expressed as the Acid Value, which is the number of mg of potassium hydroxide required to neutralize the free acids in 1.0 g of the substance[1]


Methods

The acidity of fats and fixed oils in USP may be expressed as the number of mL of 0.1 N alkali required to neutralize the free acids in 10.0 g of substance.


USP 401 Method II

Prepare 125 mL of a solvent mixture consisting of equal volumes of isopropyl alcohol and toluene. Before use, add 2 mL of a 1% solution of phenolphthalein in isopropyl alcohol to the 125 mL mixture and neutralize with alkali to a faint but permanent pink color. Weigh accurately the appropriate amount of well-mixed liquid sample indicate in the table below, and dissolve it in the neutralized solvent mixture. If the test specimen does not dissolve in the solvent, connect the flask with a suitable condenser and warm slowly, with frequent shaking, until the specimen dissolves. Shake vigorously while titrating with 0.1 N potassium hydroxide VS or 0.1 N sodium hydroxide VS to the first permanent of the same intensity as that of the neutralized solvent, before mixing with sample[2]. Calculate Acid value by the formula:

56.11V X N/W


Acid Value Sample Weight (g)
0-1 20
1-4 10
4-15 2.5
15-74.9 0.5
≥75.0 0.1


Referencia

  1. Warth, A. H.; The Chemistry and Technology of Waxes. Reinhold Publishing Corporation. Second Edition, p. 586
  2. Pharmacopedia/National Formulary. US., Vol. 1, 2009, p. 150