Revision as of 10:35, 14 August 2013

Acidity is frequently expressed as the Acid Value, which is the number of mg of potassium hydroxide required to neutralize the free acids in 1.0 g of the substance^[1]

Methods

The acid value of a wax is determined by dissolving a known amount of the wax in alcohol and titrating the solution against standard alkali solution.

USP 401

The acidity of fats and fixed oils in USP may be expressed as the number of mL of 0.1 N alkali required to neutralize the free acids in 10.0 g of substance.

Weigh 3 g of sample and place it in a clean 250 mL Erlenmeyer flask. Place 50 mL of solvent (isopropyl alcohol-toluene 5:4) connect the flask with a suitable condenser and warm slowly, with frequent shaking, until the sample dissolves. Remove the flask from the condenser and add 1 mL of a 1% solution of phenolphthalein in isopropyl alcohol. Shake vigorously while titrating with 0.1 N potassium hydroxide. Register the volume of potassium hydroxide consumed.

180x180px|centro|

Where: 56.11: is the molecular weight of potassium hydroxide V: is the volume in mL N: is the normality of the potassium hydroxide solution W: is the weight, in g, of the sample taken

Referencia

1. ↑ Warth, A. H.; The Chemistry and Technology of Waxes. Reinhold Publishing Corporation. Second Edition, p. 586